WS056S (part handling deburring and polishing machine)
- TR057AC (aluminum wheel face chamfering machine)
- WS056 (part handling deburring and chamfering machine)
- WS056S (part handling deburring and polishing machine)
External dimensions and specifications of the part handling deburring and chamfering machine for small metal parts
The WS056S handles parts and works on them with a sanding head. Compared with tool handling, this system saves space.
External Dimensions and Specifications
WS056S (part handling deburring and polishing machine)
External dimensions (mm)
Product Specifications
| Model | WS056S part handling deburring and polishing machine |
|---|---|
| Installation space | 2,000 × 2,000 + α × 2,000 mm (W × D × H) |
| Weight | 1,500 kg |
| Target parts | Deburring and polishing of small metal parts. Parts must have areas within 200 × 200 mm and weights at or below 1 kg. |
| Part insertion and removal | Jig above air shuttle line (standard)/manual insertion and removal by the operator |
| Model selection | 1 to 99 types. Specify by number. |
| Robot | FANUC Robot LR Mate 200iC/5 |
| Power supply | Three-phase 200 to 220 VAC +10% or -15%; 50/60 Hz |
| Power capacity | 5 KVA |
| Air source | Pressure: 0.4 MPa. Consumption: 100 NL/min |
| Other specifications | Pallet and hand are not included. Custom designs are available. |
Questions about the WS056S (part handling deburring and polishing machine)
Please direct your questions about the WS056S (part handling deburring and polishing machine) to the following phone and fax numbers:
Phone: +81-53-467-3601 (FA Division)
FAX: +81-53-467-3613