TR057AC (aluminum wheel face chamfering machine)
- TR057AC (aluminum wheel face chamfering machine)
- WS056 (part handling deburring and chamfering machine)
- WS056S (part handling deburring and polishing machine)
External dimensions and specifications of the aluminum wheel face chamfering machine
A chamfering and deburring machine with special tool heads for aluminum wheels that removes the burrs that appear on aluminum wheels.
External Dimensions and Specifications
TR057AC (aluminum wheel face chamfering machine)
External dimensions
Product Specifications
| Model | TR057AC (aluminum wheel face chamfering machine) |
|---|---|
| Installation space | 1,200 × 1,250 + α × 2,000 mm (W × D × H) |
| Weight | 800 kg |
| Wheel size | 14 to 20 inches Clamp jig (change attachment every 3 or 5 inches) |
| Wheel insertion and removal | The operator inserts and removes the wheels manually |
| Device specifications | Wheel NC index (robot auxiliary axle is driven by NC motor) Wheel automatic alignment clamp Wheel automatic origin detection method |
| Tool holder | Air driven motor. Floating system for deburring. |
| Model selection | 1 to 99 types. Specify by number. |
| Robot | FANUC Robot LR Mate 200iC/5 |
| Power supply | Three-phase 200 to 220 VAC + 10% or -15%; 50/60 Hz |
| Power capacity | 1.2 KVA |
| Air source | Pressure: 0.5 MPa. Consumption: 300 NL/min |
| Other specifications | Automatic door with air sensor (can be attached to a synchronization device) |
Questions about the TR057AC aluminum wheel face chamfering machine
Please direct your questions about the TR057AC aluminum wheel face chamfering machine to the following phone and fax numbers:
Phone: +81-53-467-3601 (FA Division)
FAX: +81-53-467-3613